Using all 4, I could irrigate the whole yard in about 2 hours, where it took me much longer beforehand. I added an MP Rotator using the same method for grins and giggles, and also to see how I liked them. This durable Shrub Head sprinkler comes with and easy to adjust spray pattern, between 25° and 360° and an adapter to fit on 1/2 in. I used 3 heads for the setup, and was able to get 1K on the left side of the yard with those 3. Made it more effective, and I didn't have to move my hoses around as much. I watered my front and back yard last season with that method.įirst, I started out with the Orbit gear drive heads from Lowes that were about $20/each, and was really surprised that I could get a much better spray pattern and higher flow rate with the Hunter PGP heads at a lower cost (they were about $12 each IIR). You'll need to get the nipple adapter to fit into the stake, but you'll have much better coverage with those heads, and not have to move them around. See if you can get some of the Hunter PGP heads, and mount them on stakes that your standard impact sprinklers use. For outdoor irrigation use with cold water only.You can use the above ground and hose setup that you have, you just need to get better irrigation heads. Recommended operating pressure is 60 PSI. The Voyager II replaces rotors from Orbit, Hydro-Rain, and other major brands. MPT Funny Pipe fittings, swing fittings and risers. of coverage to disperse water over a large area of grass. The sprinkler rises 1-3/4 inches above sod level and provides 15 sq. The brass nozzle has an adjustable-flow screw and sprays a distance up to a 15 foot radius. male pipe thread (MPT) Blu-Lock combination swing joint, although it is compatible with 3/4-in. The Orbit Plastic Full-Radius Pop-Up Sprinkler Head features a full-pattern preinstalled brass nozzle. The state-of-the-art approach to mounting a Voyager II is on a 3/4-in. The can and riser stem are made from high impact ABS and metal components are made from stainless steel.Īdjustment of both the radius and arc requires the included gear-drive rotor key. It also includes a bottom inlet filter which helps prevent clogging of the nozzle. It includes a radius adjustment screw which allows you to reduce the rotor throw down to 75% of its rated distance. It also includes a matched-precipitation nozzle rack with 1.0, 2.0, 3.0, 4.0 standard and low-angle nozzles featuring a unique keyway design to ensure highly uniform close-in and far-out watering, as well as an 8.0 GPM pasture nozzle. This very low rate reduces the risk of runoff or puddling for many soil types and conditions. For outdoor irrigation use with cold water only. For optimum efficiency pair the adjustable pattern spray nozzle with a professional series pressure-regulating spray body set at 30 PSI. radius versions, each with a color-coded body for fast identification. Pop Up Sprinkler Head with Brass Half Nozzle. Perfect for smaller-sized yards and garden areas, this Orbit 54070 durable brass sprinkler features a pop-up height of 1 inches. Insert a flat-head screwdriver into the slot of the screw in the center of the nozzle and turn it clockwise to reduce the spray amount and distance. The adjustable pattern nozzle is available in 4-, 8-, 10-, 12-, 15- and 18-ft. Hard Top Pop-Up Sprinkler Head with 15 ft. It comes with a pre-installed 3-gallon-per-minute (GPM) nozzle which results in a full-pattern precipitation rate of 0.24 in. Professional Pop-Up Spray Head Sprinkler with Brass Half Pattern Twin Spray Nozzle. pop-up height ensures that the nozzle clears tall grass. Its arc is adjustable from 40 to 360 degrees in precise increments, which gives you the ability to aim it so that the water hits the landscape only and avoids any hardscape surfaces. The Voyager II gear-drive rotor is engineered specifically to water landscape areas which require a throw distance of up to 35 ft.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |